ALL POWDERCOATING ORDERS ARE CURRENTLY APPROX 14 DAYS

Cut Off Disc for Metal 115 x 1.2 x 22mm 4.5"

£1.30 £1.08
In stock
SKU
FAI11512M
Key Clamp 27mm
 
Our 27mm system is designed for use with 26.9mm External Diameter Tube with a 3.25mm Wall Thickness. This is commonly referred to as 3/4" (Three Quarters of an Inch) Internal Diameter pipe.

Best For:

  • Lightweight Frames
  • Small Furniture
Key Clamp 34mm
 
Our 34mm system is designed for use with 33.7mm External Diameter Tube with a 3.25mm Wall Thickness. This is commonly referred to as 1" (One Inch) Internal Diameter pipe.

Best For:

  • General Use (Light)
  • Clothing Rails
Key Clamp 42mm
 
Our 42mm system is designed for use with 42.4mm External Diameter Tube with a 3.25mm Wall Thickness. This is commonly referred to as 1.1/4" (One and Quarter Inches) Internal Diameter pipe.
 
Best For:
  • Handrailing, Light Barriers
  • Desks, Tables, Chairs
Key Clamp 48mm
 
Our 48mm system is designed for use with 48.3mm External Diameter Tube with a 3.25mm Wall Thickness. This is commonly referred to as 1.1/2" (One and Half Inches) Internal Diameter pipe, and is the standard Scaffolding size also.

Best For:

  • Pedestrian Safety
  • Heavy Handrailing
Key Clamp 60mm
 
Our 42mm system is designed for use with 60.3mm External Diameter Tube with a 3.50mm Wall Thickness. This is commonly referred to as 2" (Two Inch) Internal Diameter pipe.

Best For:

  • Ultra Heavy Handrailing
  • Heavy Duty Frames

DDA Fittings

DDA Fittings are part of a hybrid system that incorporates a mixture of 42mm and 48mm systems. We always recommend that our customers seek expert advice with DDA systems and fittings, especially if you are unaware of the differences regarding installation and design of DDA compliant handrails.

 
 
Brand
Key Clamp Store 
5 / 5
Contact Us

FAI11512M Cut Off Disc for Metal 115 x 1.2 x 22mm



These metal cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90 degrees.


Size. 115 mm x 1.2 x 22 mm.


It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.


Very fast cutting, ideal for stainless steel.


More Information
Powder Coating AvailableNo

Information On Key Clamps

All the clamps we sell are cross compatible.
We sell brands including: Q Clamp, Tubeclamps, Pipeclamps, Interclamp, JM Clamp and Alvin Key Clamp, amongst a few other generic Key Clamp Brands.

Some manufacturers use different part numbers.
Give us a call if you aren't sure what part you need because your original part number doesn't tally up.

And remember, all key clamps are returnable if they do not suit.
With the exception of Cut to length Handrail Tube and Modified parts, we accept returns with no questions asked.

Shipping & Delivery

We aim to deliver your items within the 48 hour timeframe quoted on checkout. During busy periods this may differ and is an estimate only.

Cut to size, bespoke, and painted orders/items may delay this.

Free Shipping is available on orders for fittings only over £50, unless we have a special offer, or we have agreed that postage will be waived.

Our logistics are taken care of via Royal Mail, Tuffnells, Interlink, DPD and UKMail.

For full shipping information click here. For Urgent orders, please email in with your requirements.